 |
| The oil will be able to flow from side to side, ... but at a controlled rate. The idea is to prevent the oil from all sloshing to one side in a tight corner and uncovering the pick-up! If you end upside down, ... this will not help you! ;) |
 |
| Chrysler made some changes in the GT turbo block, head and head-gasket. I was able to incorporate the turbo head gasket into this build-up. Some head castings have the extra meat cast into the head to use the new gasket and some don't! ... ANT, ... you'r living right bud!! |
| The cams and timing setup will be coming next. I'll try to show some info on the process of degreeing in the cams when we get there. ... I'm on a tight time line with this one, ... so I may have to edit and post the pix during the Christmas break. |
 |